Post Clean System

The Comac Post Clean System Rinser/Dryer features a recirculated 130 PSI rinse, light scrub using soft nylon brushes and a dryer. The machine works well for flux removal after hot air leveling, oil leveling or reflow and will prove excellent after routing or final cleaning

Comac Post Clean System

The recirculating tank and body are one piece of molded corrosion free fiberglass. The machine has a powder coated frame and other components are made of corrosion resistant PVC, polypropylene and stainless steel. The conveyor system is designed to allow easy roller removal for cleaning and maintenance. The standard unit accommodates panels from 24" down to 4" and thickness from .006" to .20".

THE PCS CONSISTS OF THREE OPERATIONS:

The first operation has four spray bars with 28 fan type spray nozzles supplying water at an adjustable rate from 40 – 130 PSI from a 30 gallon recirculating tank thru a 1 HP Booster pump. The spray nozzles have easily removed tips for cleaning. Two soft nylon brushes operating at 1100 RPM provide excellent surface cleaning.

The second operation has four spray bars with 28 fan type nozzles supplying tap pressure water thru an electric solenoid water valve. This water casades into the recirculating tank to maintain freshness.

The first two operations can also be configured with six spray bars connnected to the recirculation tank and only two with fresh water.

The last operation is a proven 5 HP high pressure turbine supplying filtered air compression heated to 40 degrees above outside air temperature thru six stainless air knives for drying.

Options for the machine include a catch tray, variable speed brush motor with 0 – 1100 RPM. 3 KW air heater with digital thermostat control, 30" wide conveyors, fresh water turn on/turn off sensor and flex conveyor for fragile materials under .006 thick.

COMAC POST CLEAN SYSTEM FEATURES INCLUDE:

COMAC POST CLEAN SYSTEM HAS THE FOLLOWING OPTIONS:

MECHANICAL SPECIFICATIONS

Comac Post Clean System